Energy saver 75kw -3 Phase Power Saver for Industry
OEM & ODM Available.
The 3 phase model can optimise the current supplied to an entire household with just one unit and with a total load limit of 75kW!
The 3 Phase energy saver covers all appliances connected within the 3 phases simultaneously. It requires a wired installation closest to the meter or incoming electric supply. It overcomes the issues of isolation switches installed as it should be wired between the meter and any isolation board or MCBs.
You may require some professional help in installing the 3 phase energy saver. Kindly follow the installation instructions and safety guidelines that come with the product to ensure there is no damage to the unit and connected appliances. We have designed the units such that the installation is safe and relatively hassle free.
1. 25 year life expectancy
2. Three Phase
3. LCD display
4. Load Limit: 75,000W (25,000W per phase), up to 180amps
5. Rated Voltage: 110 - 450 Volt AC Application, 50/60 HertZ
6. Use one Power Saver for every 75,000 watts and 3 phases
7. Built in Surge Suppression, Satisfactory Protection For Electrical Storms, Lightning Activity and Power Utility Spikes
8. Working Temperature: -15 degree to 60 degrees
9. Humidity: <85%.
10. Unit Size : 35cm*20cm*12cm
1. This revolutionary product uses German technology.
2. Saves energy efficiently
3. 3 phase current optimisation
4. DIY installation
5. Sturdy Alloy Casing
6. Easy and safe installation
7. Reduce electricity bills by up to 30%
8. Prolong the life of appliances
9. Maintainance free
10. Sleek Design
How it works
intelliworks enery saver use a state-of-the-art electrical technology to actively monitor and improve the power factor of your household,office or industrial appliances. in addition, the intelligent technology optimizes the voltage and current demands thus reducing the active power/KwH demands and can achieve up to 50% savings on your electricity bill ,it also acts as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies the load with constant voitage during momentary power surges.this in turn results in a longer lifespan of your electrical appliances.
1 x 3 Phase Energy Saver 75KW
1 x user's Manual
1. is it safe to use inerlliworks energy saver?
intelliworks energy saver have passed many tests and verifications at various certification levels,and has demonstrated its capability to engender savings up to 10% or more on electrincal power usage , it has been inspected under strict conditions and is almost a zero defect product with high safety,non heat generating and non electrincal enery consumption.it stabilizes voltage, reduces current,enhances PF of appliances,and extends the life of appliances.
2.if plug in more than 1 intelliworks energy saver will i save more?
no.one device is sufficient per phase, any additional units piugged in,will not increase savings.
3.why se interlliworks energy saver?
all electrical epuipment/appliances efficiency reduces with time,as appliances age,it will consume more power without being realized,ence higher electricity bills.
due to many appliances in one household each with different power and current requirements affects voltage and current consumption.unstable supply voltages increase in resistance due to wire size and poor power supply which may result in power loss.
extra electrincal power can also be lost naturally (wire loss) or at the instant of turning on the power equipmen.
4.what is the lifespan of an intelliworks Energy saver?
intellwoeks energy saver are expected to last about 80000 hours of continued usage.
5.Do i need a qualified technician/electrinian to install the intelliworks energy savers?
you do not require any help in installing the devices,just plug them into any wall socket and let tham start saving.once the green lights light up you can be sure savings have stared.
notes:plug into a direct wall socket only and as close to the electricity meter as possible.
6.can intelliworks energy savers be used in other countries that have an electrinity supply of 110 to 130 vac or 220 to 240 vac,50-60Hz.kindly confirmed your pin requirements before placing an order with us for compatibility with your local sockets.
-plug this device into a wall socket,not an extension cord or multiple socket and switch on the unit.
-when you see 2 green LED lights turn on,the unit has started saving electricity
-install one power saver to each phase